Showing all 9 results
-
DriveConfig
PC tool for InteliDrive controller configuration.
DriveConfig is a tool for Windows 2000/XP/Vista/ Win7/ Win8 that provides the following main functions:
- Modification of controller configuration: Set peripherals, assign functions or protections to inputs and outputs, PLC programming and others.
- Controller firmware update.
- Adjust initial setpoint values.
- Read and write configurations to the controller.
- Load or save configurations from a file.
- DriveConfig 2.0 and later versions contain a powerful and user-friendly graphical interface for PLC programming.
DriveConfig 3.1 and later versions contain ScreenEditor, which allows customizing the interface on color screens by managing screen types, selecting instruments, and creating backgrounds using graphic element tools.
-
GenConfig
PC tool for IG/IS-NT controller configuration
Genconfig is a tool for Windows 2000/XP/Vista/Win7/Win8 that provides the following main functions:- Modification of controller configuration: setting peripherals, assigning functions or protections to inputs and outputs, PLC programming, and others.
- Controller firmware update.
- Adjusting initial setpoint values.
- Reading and writing configurations to the controller.
- Loading or saving configurations from a file.
Genconfig 2.4 and later versions contain a powerful and user-friendly graphical interface for PLC programming.
Genconfig 2.6.1 and later versions contain Screen Editor, which allows for customizing the interface on color screens by managing screen types, selecting instruments, and creating backgrounds using graphical element tools. -
-
IGS-LOG
Continuous monitoring of one/multiple IG/IS controllers.
- Stores measured values and history information of all controllers on site.
- Direct connection, via modem or online internet.
- Adjustable logging period.
- Automatic saving procedure in EXCEL or CSV files.
- Creates graphs of measured values (online) or stored (offline).
-
InteliMonitor
PC tool for Inteli controller monitoring.
InteliMonitor is a software compatible with Windows 2000/XP/Vista/Win7/Win8 that mainly provides the following functions:- Online monitoring of a controller or site.
- Fully customizable SCADA diagram.
- Browsing of all measured and computed values.
- Browsing of the controller’s history logs.
- Modifiable settings.
- Active call reception.
- Monitoring of the built-in PLC using the PLC Monitor tool.
The following controllers are supported by InteliMonitor:
- InteliLite NT.
- InteliCompact NT.
- MainsCompact NT.
- InteliGen NT.
- InteliSys NT.
- InteliMains NT.
- InteliGen Classic.
- InteliSys Classic.
- InteliPro.
- InteliDrive DCU.
- InteliDrive Mobile.
InteliMonitor can be connected to the controller or site:
- Directly using a serial cable.
- Remotely via modem.
- Remotely via internet (ethernet).
- Remotely via AirGate.
- Offline (Browsing of previously saved information).
-
LiteEdit
PC tool for configuration and monitoring.
LiteEdit is a Windows 2000/XP/Vista/Win7 compatible application that primarily provides the following functions:
- Compatible with controllers: InteliATS NT, InteliLite NT, InteliCompact NT, MainsCompact NT, InteliDrive Lite and InteliPro.
- Remote adjustment of control and monitoring parameters.
- Configuration, programming, firmware update, controller configuration cloning.
- Electronic engine support.
- Controller language translation.
- Connection via USB, RS232, modem, internet or AirGate.
-
PLC Monitor
PLC monitoring tool.
- Major progress in online PLC support for the IGS-NT controller family.
- Saves significant time during commissioning – provides an overview of all current PLC values.
- In addition to the “PLC Editor”, which allows PLC programming, we now offer an online presentation of PLC information.
- Intuitive operation and easy visualization of signals.
- Consistent graphics with “PLC Editor”.
- Zoom function for optimized reading.
PLC Monitor supports the following controllers:
- InteliGen NT.
- InteliSys NT.
- InteliMains NT.
- InteliDrive DCU.
- InteliDrive Mobile.
PLC Monitor is part of InteliMonitor. To activate it, go to: InteliMonitor > Help > Activate PLC Monitor.——————————————————————————-To activate the full version PLC Monitor Full:1. step – Download ComAp IGS-NT Install PC Suite with InteliMonitor or just download InteliMonitor Install Suite which contains the new PLC Monitor (if it is not already installed).
When the installation is finished and you run InteliMonitor, click on Help / PLC Monitor Activation and remember the number shown there (See the example below).
-
Web Supervisor
Cloud-based system for remote monitoring and control of controllers.
- Easy Plug & Play solution.
- Connected simply using AirGate technologies.
- The system works using WebSupervisor with all its benefits.
- Fleet monitoring and control.
- Alarm monitoring.
- On-line alarm notifications.
- The system supports a large number of monitored units (100-1000+).
- Server for clients.
- User-friendly graphical interface.
- Accessibility from any PC with internet access.
- Information is periodically updated from the controllers to the server database.
- Automatic report generation – User-defined XLSx files.
- Access from any device with web-enabled access such as: PC/netbook, tablet, smartphone, etc.
- E-mail notifications.
- Available in multiple languages
-
WinScope
Controller monitoring software.
- Monitoring and archiving of ComAp controller parameters and values.
- View of current/historical trends in the controller.
- Online change of controller parameters for easy setup regulation.
- Supports connections to all Inteli-line controllers.
- Allows parameter setting for ECON and INCON controllers.
- Allows parameter setting for EMCON5 controllers.
- The software is part of the ComAp gen-set and ComAp engine controllers installation package.
NOTE: There are 3 WINSCOPE activation levels:
- Without any activation, WINSCOPE works in trial mode, where only previously saved data can be viewed.
- The basic version allows monitoring of a single controller and a maximum of 4 channels.
- The advanced version allows monitoring of 32 controllers / 32 channels (some controllers only support 16 channels).
Activation is performed with the WINSCOPE activation code (WSAC). No additional HW key is needed.
